Prouduct Catalog
Automotive sealant
Building sealant
Concrete Admixtures
Hydropower Project
Nuclear Power Engineering
Contact us
Tel: 0533-3918088
Fax: 0533-3918660
Current Location::Home - Product Show -Passenger
HTM-A1 polycarboxylate superplasticizer
Product Readme

HTM-A1 polycarboxylate superplasticizer
【Products Overview】
HTM-A1 polycarboxylate superplasticizer Chemical Co., Ltd. Shandong Zibo Heitmann devoted themselves to developing a new generation of environmentally friendly high-performance concrete plus

Agent, the main component for long side-chain ether ester polymer through a variety of organic monomers and copolymerization reaction of molecular structure control design is made of polymer,

High water reduction, slump and the loss of small, high-strength performance characteristics, widely used in different types of concrete projects or needs, especially for

C50 self-leveling concrete above and underwater high flowing self-compacting concrete. Performance indicators are significantly in excess of GB8076-2008, JG/T223, iron

Road Department 【2009】 152 and other technical standards prescribed performance index, can be widely used in municipal, transportation, hydropower, nuclear power, military engineering.
】 【Main Technical Performance
Executive Standard: GB8076-2008

Recommended dosage: 0.3 ~ 1.2%
HTM-A1 polycarboxylate superplasticizer should be widely applicable to ordinary Portland cement, Portland cement, slag cement, fly ash cement, moderate heat cement

And so on for the configuration and high performance concrete mixed with fly ash, slag, silica fume and other active mineral admixture has a good adaptability; same products and air-entraining agent, retardation

Agent compound to improve the performance of concrete construction.

Incorporation HTM-A1 after polycarboxylate superplasticizer, water cement ratio while maintaining the same situation, can increase the slump of concrete and more than 20cm of fresh concrete show uniform, low viscosity, the appearance of fine luster, for the preparation of high flowing, pumping concrete, etc. can also be used for self-compacting high performance concrete works.

Incorporation HTM-A1 after polycarboxylate superplasticizer, while maintaining strength can be achieved under the same 25% 30% saving of cement economic benefits.
【Usage and Precautions
This product is a liquid polycarboxylate water reducer, a solid content of 20% to 50% concentration of the product, PH value is 6-7. Recommended dosage is the amount of cementitious material

0.3% ~ 1.2%. Preparation of high strength concrete, the dosage can be appropriately increased;

Optimum dosage of this product the best label in accordance with the design and testing of concrete Choose OK. But not with naphthalene sulfonate superplasticizer compound, when preparing with other external

Agents used simultaneously, the need to carry out compatibility tests;
【Packing, storage】
Product is a liquid product is required by 200 kg, 1 ton of plastic packaging containers such as drums or tank vehicles transport, it is best not to long iron drum packing. This product

Stable, long-term storage is not hierarchical, no precipitation, the winter ice-free.

  Copyright © 2010 Inc. All rights reserved. 鲁ICP备12017530号-1