Prouduct Catalog
Automotive sealant
Building sealant
Concrete Admixtures
Passenger
Hydropower Project
Highway
Construction
Nuclear Power Engineering
Waterproofing
Contact us
Tel 0533-3918088
          3918660 
Fax 0533-3918660
          3918662 
Current LocationHome - Product Show -Passenger
HTM-A3 early strong polycarboxylate superplasticizer
(Number:71712532416)
Product Readme

HTM-A3 early strong polycarboxylate superplasticizer
Products Overview
HTM-A3 polycarboxylate superplasticizer Chemical Co., Ltd. Shandong Zibo Heitmann devoted themselves to developing a new generation of environmentally friendly high-performance concrete admixtures,

The main components of long side-chain ether ester polymer through a variety of organic monomers in the copolymers and control design of molecular structure made of polymer reaction after cool down after

Join the early strength, air-entraining component compound is made with high water reduction, slump and the loss of small, high early strength and performance characteristics, widely used in different intensity

Grade concrete performance requirements, especially for self-leveling concrete and C50 above the high water flow self-leveling concrete self-compacting concrete and high water flow from the Middle

Fact, prestressed, steam curing concrete. Performance indicators are significantly in excess of GB8076-2008, JG/T223, the Ministry of Railways 2009 152 technical standards, etc.

Performance requirements can be widely used in municipal, transportation, hydropower, nuclear power, port workers and military projects.
Main Technical Performance
Executive Standard: GB8076-2008

Recommended dosage: 0.5 ~ 2.0%
The scope of application
HTM-A3 polycarboxylate superplasticizer should be widely applicable to ordinary portland cement, portland cement, moderate heat cement, high performance coagulation for configuration

Soil mixed with fly ash, slag, silica fume and other active mineral admixture has a good adaptability; same products and air-entraining agents, retarders, etc. to improve the performance concrete mixture

Work performance.
Incorporation HTM-A3 polycarboxylate superplasticizer, the water cement ratio while maintaining the same situation, can increase the slump of concrete and more than 18cm of fresh mixed

Concrete show uniform, low viscosity, the appearance of fine luster, high early strength for the preparation of high flow such as steam curing of concrete, can increase the turnover rate of the template provided

High economic efficiency,

Incorporation HTM-A3 polycarboxylate superplasticizer after maintaining strength can be achieved under the same 25% 30% saving of cement economic benefits.

If you adjust the HTM-A3 polycarboxylate superplasticizer gas content and adding antifreeze component, you can use as a winter construction of concrete admixtures.
Usage and Precautions
This product is a polycarboxylate superplasticizer liquid, containing solid content of 10% to 40% concentration of the product, PH value is 6-7. Recommended dosage is the amount of cementitious material

0.5% ~ 2.0%. Preparation of high strength concrete, the dosage can be appropriately increased;

Optimum dosage of this product the best label in accordance with the design and testing of concrete Choose OK. But not with naphthalene sulfonate superplasticizer compound, when preparing with other external

Agents used simultaneously, the need to carry out compatibility tests;
Packing, storage
Product is a liquid product is required by 200kg or 1 tonne of plastic containers such as drums or tank vehicles packing and shipping, it is best not to long iron drum packing. The product of

Stable, long-term storage of non-hierarchical, non-precipitation, the winter ice-free

 
  Copyright © 2010 Hitemen.com Inc. All rights reserved. ³ICP12017530-1